Leather Lacquer Finish

Clear Lacquer Leather finish is a clear coat sealer/lacquer designed to be applied over the top of the Leather colorant, to seal in the topcoat, giving the finish an extremely hard wearing surface, protecting it from grime, stains and dirt.

1. Apply the leather lacquer finish to a sponge and dab on
2. When dabbing onto the surface, be careful not to overload the sponge as you do not want to create a froth
3. If spraying, spray in even overlapping motions, ensuring you have covered the area completely
4. Apply two to three coats maximum and allow to dry between each coat
5. You can speed the drying process up with a hairdryer
6. Between the first and second coat, lightly sand with 1200 grit paper to give it a soft and silky finish feel before applying the final coat of Lacquer Finish

‍

When you are drying the topcoat leather sealer this is best done with a hairdryer don’t get the surface too hot, just stay around 6 to 8 inches away from the surface so that the topcoat leather lacquer sealer can be dried thoroughly.