
DESCRIPTION
LRC45
The most effective heat cure base filler.
Our Base Grain Compound is used with a heated iron to create the base for holes in leather.
This product is used where holes are very big in leather to act as a base grain prior to using the grain copier compound (LRC46), this is applied to its left below the surface so the grain copier can then be applied to represent the grain in the surface of the leather.
Can also be used as a stand-alone product to fill and grain holes in plastic trims.
Place the compound into the hole to be fixed and then apply the Teflon paper over the top and heat with the heated iron until cured, depending on the size of the hole and atmospheric conditions will determine how long this will take to cure, once cured cool down with the cooling bar and then apply the grain copier compound LRC46, apply the grain copier pad over the grain copier compound, then place the Teflon paper over the surface and then heat with a heated iron until cured leaving the grain copied into the repair allowing the repair to be blended in.
Before coloring wipe over with alcohol cleaner.