Leather Shoe Recycle and Colour Repair Kit

Instructions

Our Kits are unique they are a very easy, simple four stage process.

1. First of all you will need to clean the leather thoroughly

2. The next step is to use the prep, this is designed to remove some of the old surface coating, the reason for doing this is its removing all old dirt, grease, waxes and oils from the surface and some of the old manufacturers finish, this then gives you a base to work from allowing the colorant to adhere correctly to the leathers surface. Without removing some of the color, the new color wont bond correctly. Before applying the colorant wipe down the surface fully with alcohol cleaner.

3. The next stage is to color the area to be repaired

4. Once colored, you then seal this over with the clear coat sealers (Gloss and Matt Finish) the gloss and matt finish can be mixed together to give you a satin finish if this is the desired look you require, this can be done by mixing them 50/50, the kits comes with sand paper to very lightly sand the surface between coats to ensure you finish with a silky smooth result every time.

What's Included

‍

• 1x 100ml Leather Cleaner

• 1x 100ml Base Color

• 3x 15ml Tints each (sometimes more depending on base color)

• 1x 30ml Gloss Finish

• 1x 30ml Matt Finish

• 1x 50ml Leather Prep

• 1x 50ml Alcohol Cleaner

• 1x Mixing Cup

• 2x Small Applicator Sponges

• 2x Toothpicks

• 1x Mixing Sticks

• 2x Cotton Buds

• 1x 1200 Sandpaper (1/8 Sheet)

• 1x 3000 Sandpaper (1/8 Sheet)

• 1x 280 Sanding Pad

• 1x Emery Pad (1/4 Sheet)

• 3x Small Cloths